SDR Instruments

T-Display-S3 Introduction The T-Display series has added a new member. It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh]. The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it. This will be the second...

The  SDR-LW 2972 is a versatile 2x2 MIMO Software Defined Radio (SDR) platform with AD9361 RFIC , supporting a frequency range of 70 MHz–44 GHz and 56 MHz bandwidth per channel . Featuring USB 3.0 connectivity and an Artix 7 XC7A200T FPGA , it enables high-speed data transfer...

The MicroPhase ANTSDR E316 is a portable 2×2 MIMO Software Defined Radio (SDR) demo board based on the ADI AD9361/AD9363 RFIC and Xilinx Zynq-7020 SoC . It covers 70 MHz–6 GHz with up to 56 MHz instantaneous bandwidth , and features 1 GB DDR3, 256 Mb QSPI flash, Gigabit Ethernet,...

Features: - Its performance indicators are consistent with the imported version, and its stability is better - Using industrial-grade chips, supporting temperature range -40 to 85℃ - Highly integrated, radio frequency ranges from 70MHz to 6GHz - Support maximum real-time bandwidth 56MHz,...

This is a kit designed for  Deauther MiNi V3. This kit includes Deauther MiNi V3, 800mAh battery, Type-c cable, 3dBi antenna, and a 3D-printed case for Deauther Mini. Just like the picture it is ready to use. When you receive it, please take out the Type-C cable first and then remove...

The LILYGO Meshtastic T-Beam SUPREME ESP32-S3 Development Board is a collaborative module from LILYGO and Meshtastic, designed for advanced IoT and LoRa experimentation. Powered by the ESP32-S3FN8 dual-core LX7 processor, it integrates a LoRa SX1262 module, GPS (U-blox MAX-M10S-00B or L76K),...

Package List: 1. ANTSDR E310 x1 Accessory(w/o accessory is not including below list) 1. Aluminum Case (Installed) 2. Micro USB cable 3pcs 3. 16GB Micro SD Storage card 1pcs 4. Card Reader 5. Multi-band 4G/3G/2G Monopole Antenna 3pcs

The  USRP N310 is a networked Software Defined Radio (SDR) platform engineered for large-scale, distributed, and high-reliability wireless systems. Featuring four independent TX/RX channels with dual AD9371 RFICs , it delivers up to 100 MHz bandwidth per channel over a frequency...

The SBX-40/120 is a full-duplex wideband SDR daughterboard covering 400 MHz to 4.4 GHz with 40 MHz or 120 MHz instantaneous bandwidth . It delivers up to 100 mW output power and a typical noise figure of 5 dB , making it ideal for WiFi, WiMAX, S-band, ISM, and cellular applications...

The WBX-40/120 is a full-duplex wideband SDR daughterboard covering 50 MHz to 2.2 GHz with 40 MHz or 120 MHz instantaneous bandwidth . It delivers up to 100 mW output power and a typical noise figure of 5 dB , making it ideal for a wide range of RF applications. Key Features and...

The LILYGO® T-Embed ESP32-S3 CC1101 is a high-performance, low-power wireless module designed for IoT applications. Featuring a dual-core ESP32-S3 microprocessor, built-in 2.4 GHz Wi-Fi and BLE 5, and advanced RF capabilities with the CC1101 transceiver, this module is perfect for sub-1...

DIP DIP encapsulation accuracy：0.1-0.5ppm DIP packaging fine working temperature: - 20 ℃ -- 85 ℃ Precision (PPM) : 0.1 PPM (0-25 degrees normal temperature)

The LILYGO® TTGO T-CAN485 ESP32 Module is a powerful and versatile development board designed for IoT engineers. Powered by the ESP32 MCU, this module supports various bus interfaces, making it ideal for a wide range of applications. With built-in Wi-Fi and Bluetooth connectivity, it...

The 2025 Clifford Heath Version R10+ HackRF One is an enhanced open-source SDR transceiver featuring robust upgrades for both RF performance and hardware reliability. This version adds strong protection to the antenna port using the CLA4611-085LF, safeguarding both the transmit amplifier...

USRP-LW B205mini-i is a powerful and compact USB Software Defined Radio (SDR) transceiver designed for advanced wireless research, IoT prototyping, and SDR development. Featuring the Analog Devices AD9364 RFIC , it supports 1x1 TX/RX channels and covers a wide frequency range from 70MHz...

The UBX-40/160 is a full-duplex wideband SDR daughterboard covering 10 MHz to 6 GHz with 40 MHz or 160 MHz instantaneous bandwidth . It enables coherent and phase-aligned operation with multiple boards, making it ideal for advanced MIMO and direction-finding applications...

SDR 3980 is a standalone, high-performance 8-channel Software Defined Radio (SDR) device equipped with 4× ADRV-9009 RF chips and an onboard Intel i9-9900K processor . Covering a frequency range of 75 MHz to 6 GHz , this platform delivers 450 MHz transmit and 200 MHz receive bandwidth...

LILYGO T-Call A7670 is a compact ESP32 development board designed for cellular IoT and remote data projects. At its core is the ESP32-WROVER-E, running at 240MHz, with 4MB Flash and 8MB PSRAM. The board features the A7670E module, giving you both 4G LTE Cat-1 and 2G GSM connectivity for...

The MicroPhase ANTSDR U200 is a compact 1×1 SDR transceiver board powered by the ADI AD9363 RFIC . It covers 325 MHz–3.8 GHz  with up to 56 MHz instantaneous bandwidth and delivers transmit power up to 10 dBm with a noise figure <8 dB. Key Features and Specifications...

Looking for a compact board that handles wireless projects and displays data clearly? The LILYGO T3S3 E-Paper ESP32-S3 is a smart choice for anyone building IoT gadgets, remote sensors, or portable dashboards. You get a dual-core ESP32-S3, your pick of LoRa modules (2.4GHz, 868MHz, or 915MHz),...