Bestsellers

Includes 1x RTL-SDR Blog Broadcast AM Reject Filter Designed to block the broadcast AM band between 500 kHz - 1.7 MHz with over 50 dB of attenuation. The 3 dB roll-off point is between 2.5 - 2.6 MHz. Works great with the direct sampling mode on our V3 dongles. This is a high pass filter and...

Characteristics: -Screen size 4 inches -Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz -Signal generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4 GHz when not used as a spectrum analyzer. -Switchable resolution...

Compared with PM3 RD V2.0 improvement: 1. Built-in high-frequency antenna, antenna depth matching, eliminate blind spots, read the whole card data flowing without interruption. 2. increase Parse the secret key rate , the size of the card takes all. 3. sniffing data, complete stable, low...

1 Using XC7Z020-2CLG400I chip 7z020-2I; 2 The AD9363 chip is configured as the AD9361 chip, the frequency range is 70MHz~6GHz, and the maximum sampling rate is 61.44MHz. As a result, the laboratory test shows that it is significantly different from the AD9361; 3 PS 1GB DDR3 32bit bit width,...

The Mayhem Signature Edition Portapack H4M represents the latest evolution in the Portapack lineup, focusing on improved usability, performance, and everyday practicality. Built for advanced users and enthusiasts, it features refined hardware, a transparent shell, integrated speaker, and a...

SMA Male Connector Antennas for Software Defined Radio SDR Demo Boards HackRF One LimeSDR

The Web-888 SDR is a next-generation software-defined radio designed for professionals and enthusiasts alike. Featuring a powerful 16-bit ADC DDC architecture and a brand-new RF frontend, it covers a wide frequency range up to 62 MHz . Its cutting-edge design offers unparalleled performance...

The world's only UHF RFID deactivation device. The UHFKill is specifically built for UHF (Ultra High Frequency) RFID Tags used in the wholesale apparel / footware / eyeware markets for inventory tracking. Instantly disable embedded UHF RFID Tags without damaging the...

SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all...

NanoVNA-H Features: 1. With the addition of the ABS casing and the new packaging, Compared to many customers using 3D printed housing, it saves costs. 2. Support typec-typec line, more convenient to connect to mobile phones ,Support to most Android phones with the same screen...

Introduction The Chameleon Ultra is the ultimate RFID emulation device : Low and high-frequency emulation, full read & write capabilities, bleeding-edge cracking, wireless control : all wrapped up in a key-chain sized, fully open-sourced device. The Chameleon Ultra is the result...

Includes 1x RTL-SDR Blog Broadcast FM Band-Stop Filter and 1x SMA male to SMA male adapter. Blocks the broadcast FM band between 88 – 108 MHz with over 50dB of attenuation. Designed for RX use only.  c Uses SMA female connectors. Comes with a free SMA male to SMA male adapter. A...

KrakenSDR is a Software-Defined, Coherently Operated, Five-RX-Channel Radio Based on RTL-SDR A coherent radio allows for very interesting applications, such as radio direction finding, passive radar, and beamforming. Some use cases include: Physically locating an unknown transmitter of...

• High Power Dual Band UHF VHF : Enjoy clear and stable communication with the high power dual band UHF VHF feature that allows you to connect to both frequencies. • IP68 Waterproof : The IP68 waterproof rating ensures that your walkie talkie can withstand harsh weather conditions and is...

User interface : * Display resolution 320*240 pixels * Screen diagonal 2.8" * 16 bits per RGB pixels * Resistive touch control * Jog switch control * USB serial port control * Optional TTL USART port (SW not yet implemented) on the internal PCB * Linear power supply to avoid switching...

The bladeRF 2.0 micro xA9 represents the pinnacle of compact software defined radio (SDR) technology, covering 47MHz to 6GHz with 61.44MSPS sampling (expandable to 122.88MSPS) and full 2×2 MIMO streaming capability. Featuring the largest FPGA in its class—a massive 301KLE...

This low noise amplifier is designed to boost signals in Beidou/GPS receivers , FM radio RX systems , radar receiving systems , electromagnetic compatibility receiving systems , and SDR receivers . It is engineered to enhance signal reception and ensure high performance across a wide range...

WHAT IS IT? Hackheld is a open source hackable handheld for DIY. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. Please note that the ESP8266 does only support 2.4GHz. You can also use it to...

The LILYGO T-Dongle-S3 is a compact, feature-rich ESP32-S3 development board designed for IoT, wireless communication, and embedded projects. This dongle offers exceptional performance thanks to the powerful ESP32-53 Xtensa LX7 microprocessor and its seamless connectivity options. Key...

We are pleased to announce the second-gen of RX888. RX-888 MKII is the new generation of RX888 with the following improvements and enhancements: 1. Add a tunable Attention in the HF path, which can tune from 0 to -31.5dB. 2. Change the fixed LNA of RX888 to a VGA, which gives the -10dB to +33dB...