Bestsellers

✧  [Digital & Analog Compatible]  - FCC Part90 Certification ID: 2AJGM-DM1701. The Baofeng DM-1701 boasts seamless compatibility with both digital and analog modes, covering dual band VHF/UHF frequencies of 136-174 and 400-470 MHz. With an expansive capacity of up to 3,000 Channels,...

Dual Band : The walkie talkie operates on both VHF and UHF bands, providing reliable communication over a wide range of frequencies. • High Power : With an output power of 5w-10w, this walkie talkie can communicate over long distances of up to 16 km. • Waterproof : The walkie talkie is...

USRP B210 is a highly integrated, dual-channel USB Software Defined Radio (SDR) platform, perfect for advanced wireless research, IoT prototyping, and SDR development. Powered by the Analog Devices AD9361 RFIC , it supports 2x2 MIMO operation and covers a continuous frequency range from...

Dual Band : The walkie talkie operates on both VHF and UHF bands, providing reliable communication over a wide range of frequencies. • High Power : With an output power of 5w-10w, this walkie talkie can communicate over long distances of up to 16 km. • Waterproof : The walkie talkie is...

The LILYGO TTGO MySondy GO V2.1 is a compact and versatile receiver designed for RadioSonde signal acquisition and IoT applications. Built on the ESP32 platform with 4MB flash memory, it delivers reliable wireless connectivity through integrated WiFi 802.11 and Bluetooth V4.2 + LE. The device...

The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...

This low noise amplifier (LNA) is designed for a wide range of RF receiving front-ends, offering high gain and a small noise figure to significantly enhance communication distance. It is ideal for applications like shortwave , FM broadcasting , remote control receivers , cable TV signal...

INTRODUCTION The Proxmark 3 RDV4 "BlueShark" Standalone Kit brings integrated, wireless standalone functionality to the Proxmark 3 RDV 4: Standalone Mode Offline sniffing Offline reading & simulation Built with penetration testers in mind, this upgrade consists of: Bluetooth...

The MicroPhase ANTSDR E316 is a portable 2×2 MIMO Software Defined Radio (SDR) demo board based on the ADI AD9361/AD9363 RFIC and Xilinx Zynq-7020 SoC . It covers 70 MHz–6 GHz with up to 56 MHz instantaneous bandwidth , and features 1 GB DDR3, 256 Mb QSPI flash, Gigabit Ethernet,...

Features: - Its performance indicators are consistent with the imported version, and its stability is better - Using industrial-grade chips, supporting temperature range -40 to 85℃ - Highly integrated, radio frequency ranges from 70MHz to 6GHz - Support maximum real-time bandwidth 56MHz,...

This is a kit designed for  Deauther MiNi V3. This kit includes Deauther MiNi V3, 800mAh battery, Type-c cable, 3dBi antenna, and a 3D-printed case for Deauther Mini. Just like the picture it is ready to use. When you receive it, please take out the Type-C cable first and then remove...

Package List: 1. ANTSDR E310 x1 Accessory(w/o accessory is not including below list) 1. Aluminum Case (Installed) 2. Micro USB cable 3pcs 3. 16GB Micro SD Storage card 1pcs 4. Card Reader 5. Multi-band 4G/3G/2G Monopole Antenna 3pcs

DIP DIP encapsulation accuracy：0.1-0.5ppm DIP packaging fine working temperature: - 20 ℃ -- 85 ℃ Precision (PPM) : 0.1 PPM (0-25 degrees normal temperature)

★【About New Programming and Software】 The DR-1801 is upgraded from the DM-1801. In order to distinguish the old version, it adopts a new programming software, which is compatible with the PL-2303 programming cable, which easily solves the problem of the DMR digital two way radio programming....

The 2025 TinySA ULTRA Plus ZS407 redefines portable RF analysis with its 7.3GHz frequency coverage and lab-grade performance in a handheld device. Featuring a vibrant 3.95-inch touchscreen (480×320 IPS-TFT), this analyzer delivers ultra-fast scans (165ms for 0-350MHz) and groundbreaking...

The UBX-40/160 is a full-duplex wideband SDR daughterboard covering 10 MHz to 6 GHz with 40 MHz or 160 MHz instantaneous bandwidth . It enables coherent and phase-aligned operation with multiple boards, making it ideal for advanced MIMO and direction-finding applications...

The LiteVNA-64 is a compact, portable vector network analyzer (VNA) with a wide frequency range from 50kHz to 6.3GHz. Featuring a 3.95" touch screen and MicroSD slot, it’s an upgrade over the NanoVNA—offering lower noise, higher reliability, and a broader measurement range....

The RF Power Meter V7.0 is a high-performance, portable RF power meter supporting signals up to 10GHz. It features a 1.3-inch TFT LCD, built-in lithium battery for offline use, and a robust CNC aluminum alloy housing. With Type-C USB for power and high-speed data, and an N-type male RF...

This  B210 AD9361 Software Defined Radio is a fully featured SDR platform covering 70MHz to 6GHz in full duplex with 2x2 MIMO. Built for precision and performance, it integrates the AD9361 RFIC, USB 3.0 interface, and FPGA (XC6SLX150), supporting 61.44MHz RF bandwidth and 12-bit...

The 100kHz-3MHz 50W RF Power Amplifier is a linear, low-distortion amplifier designed for medium/long wave and HF applications. With 50W output and 47dB gain, it boosts signals for TPMS, wireless charging, remote controls, research, and amateur radio projects. Key Specifications...