Test & Measurement

NanoVNA-F V3 is a Portable Vector Network Analyzer (VNA) with frequency range of 1MHz~6GHz. It can be used for S11 and S21 measurements. The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. NanoVNA-F V3 is suitable for antenna testing of MF/HF/VHF/UHF/SHF...

1. 4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes; 2. All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy; 3. The body size is 125mm*75mm*20mm, compact and...

SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all...

The NanoVNA-H4 is no ordinary instrument. This DIY marvel offers professional-grade vector network measurement capabilities in a compact, handheld form factor. Imagine a powerful tool that fits in your palm, boasting a vivid 4-inch LCD touchscreen display. Not only is it portable, but its...

Characteristics: -Screen size 4 inches -Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz -Signal generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4 GHz when not used as a spectrum analyzer. -Switchable resolution...

SA6 is a simple portable spectrum analyzer and signal range, designed to display the signal spectrum in the frequency range of 35 to 6200 MHz. The analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all...

NanoVNA-H Features: 1. With the addition of the ABS casing and the new packaging, Compared to many customers using 3D printed housing, it saves costs. 2. Support typec-typec line, more convenient to connect to mobile phones ,Support to most Android phones with the same screen...

User interface : * Display resolution 320*240 pixels * Screen diagonal 2.8" * 16 bits per RGB pixels * Resistive touch control * Jog switch control * USB serial port control * Optional TTL USART port (SW not yet implemented) on the internal PCB * Linear power supply to avoid switching...

The LibreVNA is a cutting-edge USB-based 2-port vector network analyzer designed for precision RF measurements from 100kHz to 6GHz. Featuring simultaneous dual-port sampling via 3 ADCs and FPGA processing, it captures 10,000+ measurement points in under 1 second. Encased in CNC-machined...

Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...

The NanoVNA VNA Vector Network Analyzer 2.8 inch LCD 50KHz-900MHz with Battery is a compact and portable vector network analyzer featuring a 2.8 inch TFT touch screen and a 400mAh built-in battery for offline use up to 2 hours. It supports a frequency range of 50KHz to 300MHz, extendable to...

The 1.6-50MHz PWR SWR Meter offers precise power and standing wave ratio measurements across a wide frequency range of 1.6 to 50MHz. With a power measurement range of 0.5 to 150W and an accuracy better than ±5%, it is ideal for amateur radio operators and RF enthusiasts. Featuring a...

The SV6301A 7 inch 6.3GHz Vector Network Analyzer is a powerful and portable tool designed for precise testing of antennas, filters, amplifiers, cables, and other RF components across MF, LF, HF, VHF, and UHF bands. Featuring a large 7-inch IPS LCD with 1024x600 resolution and capacitive...

The REDOT RD106P Digital SWR & Power Meter is a versatile, portable tool for FM, VHF, and UHF (80–999MHz) with max 120W power and VSWR display from 1.00 to 99.9. It supports DMR walkie talkies and RF devices, offering continuous and burst sampling, frequency compensation, and automatic...

The 2025 TinySA ULTRA Plus ZS407 redefines portable RF analysis with its 7.3GHz frequency coverage and lab-grade performance in a handheld device. Featuring a vibrant 3.95-inch touchscreen (480×320 IPS-TFT), this analyzer delivers ultra-fast scans (165ms for 0-350MHz) and groundbreaking...

GS-320 handheld vector network analyzer VNA (reflectometer) 23-6200MHz is designed to measure the matching characteristics of passive and active radio equipment (antennas, cables, filters, attenuators, amplifiers, etc.). This device enables you to measure the parameters of complex reflection...

The Mini1300 is a handheld spectrum analyzer covering 0.1–1300 MHz for HF, VHF, and UHF bands. Housed in a rugged aluminum alloy shell with a 4.3″ capacitive touchscreen , it delivers real-time spectral displays, SWR, impedance (|Z|, R, ±JX), and return-loss measurements. Key...

The LiteVNA-64 is a compact, portable vector network analyzer (VNA) with a wide frequency range from 50kHz to 6.3GHz. Featuring a 3.95" touch screen and MicroSD slot, it’s an upgrade over the NanoVNA—offering lower noise, higher reliability, and a broader measurement range....

The SA6 Plus / SA8 Spectrum Analyzer is a portable and versatile RF tool designed for real-time analysis and signal generation from 35 to 6200MHz. It displays the amplitude and frequency of spectral components for technologies like Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, and...

The RF Power Meter V7.0 is a high-performance, portable RF power meter supporting signals up to 10GHz. It features a 1.3-inch TFT LCD, built-in lithium battery for offline use, and a robust CNC aluminum alloy housing. With Type-C USB for power and high-speed data, and an N-type male RF...