RF Dummy Loads & Testing Accessories

100W RF Dummy Load DC-3GHz 50 Ohm N-Male Connector Walkie Talkie Shortwave Radio Terminator

CODE:

100W-DMMY-3YC9OR

0.0

In stock

€66⁷⁶

+ −

This 100W RF Dummy Load provides a stable 50 Ohm termination for testing high-power transmitters, walkie talkies, shortwave radios, FM stations, and RF equipment across DC-3GHz . Connected between your radio and SWR/power meter, it delivers accurate power measurements by replacing...

Connector TypeN Male Frequency RangeDC - 3GHz

DL-30A 50 Ohm DC–500MHz Coaxial Dummy Load Antenna SMA Male 15W RF Terminator

CODE:

DL-3-DMMY-VS7GBI

0.0

In stock

€54⁹⁷

+ −

The DL-30A 50 Ohm Coaxial Dummy Load is designed to provide a stable RF termination for testing transmitters, antenna ports, and RF equipment over a wide DC–500MHz frequency range. Connected in place of an antenna or feeder, it safely absorbs RF power and simplifies bench and field...

Connector TypeSMA Male Frequency RangeDC – 500MHz

2W DC-6GHz 50 Ohm RF Dummy Load SMA Male High Quality Coaxial Termination Load

CODE:

2WDC-DMMY-DDR6MU

0.0

In stock

€29⁴⁵

+ −

This 2W DC-6GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the full DC to 6GHz frequency spectrum. Perfect for lab work, production testing, and field service, it safely absorbs RF power while maintaining...

Connector TypeSMA Male Frequency RangeDC - 6GHz

100W RF Dummy Load DC-1GHz 50 Ohm UHF PL259 Male Coaxial Terminator

CODE:

100W-DMMY-FLS5HV

0.0

In stock

€67⁷⁴

+ −

This 100W RF Dummy Load with UHF PL259 male connector provides a precise 50 Ohm termination for testing high-power transmitters, antennas, and RF equipment across DC-1GHz . Perfect for ham radio operators, CB radio technicians, and RF service shops, it safely absorbs RF power during SWR...

Connector TypeUHF PL259 Male Frequency RangeDC - 1000MHz

DL-30A Plus 50 Ohm DC–800MHz Coaxial Dummy Load SMA Male 25W RF Terminator

CODE:

DL-3-DMMY-PDJSON

0.0

In stock

€57⁹²

+ −

The DL-30A Plus 50 Ohm Coaxial Dummy Load is designed as a stable RF terminator for walkie talkies, mobile radios, and test equipment over a wide DC–800MHz frequency range. Connected in place of an antenna, it simulates the antenna feeder and safely absorbs RF power, making on-bench or...

Connector TypeSMA Male Impedance50

DL-50A 50 Ohm DC–1000MHz 100W Dummy Load M Male for SWR Meter and Walkie Talkie Testing

CODE:

DL-5-DMMY-DSL2P0

0.0

In stock

€87³⁷

+ −

The DL-50A 50 Ohm Dummy Load is designed for accurate power and SWR testing of radio stations, walkie talkies, and RF equipment over a wide DC–1000MHz frequency range. Connected to an SWR/power meter or directly to the radio, it provides a stable 50 Ohm termination and converts RF energy...

Connector TypeM Male Frequency RangeDC - 1000MHz

200W DC-3GHz 50 Ohm Coaxial Dummy Load N-Type Male for Walkie Talkie Mobile Radio Testing

CODE:

200W-DMMY-6VBL1W

0.0

In stock

€89³³

+ −

The 200W DC-3GHz Coaxial Dummy Load with N-Type male connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while enabling...

Connector TypeN Male Frequency RangeDC - 3GHz

200W DC-3GHz 50 Ohm Coaxial Dummy Load N-Type Female for Walkie Talkie Mobile Radio

CODE:

200W-DMMY-Z8XWKC

0.0

In stock

€101¹¹

+ −

The 200W DC-3GHz Coaxial Dummy Load with N-Type female connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while...

Connector TypeN Female Frequency RangeDC - 3GHz

10W SMA Male 50 Ohm DC-3GHz RF Dummy Load Coaxial Terminator Radio Test Accessory

CODE:

10WS-DMMY-ZDRKHG

0.0

In stock

€37³⁰

+ −

This 10W SMA Male Dummy Load delivers precise 50 Ohm RF termination for testing transmitters, antennas, and RF equipment across the full DC-3GHz spectrum. Ideal for lab bench testing, production quality control, and field service, it provides a stable load that safely absorbs RF power...

Connector TypeSMA Male Frequency RangeDC - 3GHz

10W N-Type Male 50 Ohm DC–3GHz Coaxial Dummy Load RF Terminator Radio Test Accessory

CODE:

10WN-DMMY-HRYFKE

0.0

In stock

€32⁴⁰

+ −

This 10W N-Type Male Dummy Load provides a precise 50 Ohm termination for RF testing, antenna port protection, and transmitter evaluation across a wide DC–3GHz frequency range. Designed as a high-quality coaxial load, it safely absorbs RF power and simulates antenna impedance for accurate...

Connector TypeN Male Frequency RangeDC - 3GHz

2W DC-4GHz 50 Ohm RF Dummy Load SMA Male High Quality Coaxial Termination Load

CODE:

2WDC-DMMY-GSQHKT

0.0

In stock

€35³⁴

+ −

This 2W DC-4GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the DC to 4GHz frequency spectrum. Perfect for microwave lab work, production testing, and field service, it safely absorbs RF power while maintaining...

Connector TypeSMA Male Frequency RangeDC - 4GHz

25W DC-4GHz 50 Ohm N Male RF Dummy Load High Quality Coaxial Terminator

CODE:

25WD-DMMY-DNHCR0

0.0

In stock

€50⁰⁷

+ −

This 25W DC-4GHz N Male Dummy Load provides precise 50 Ohm RF termination for testing professional RF equipment, base stations, amplifiers, and microwave systems across the full DC to 4GHz spectrum. With robust power handling and excellent VSWR characteristics, it's ideal for laboratory...

Connector TypeN Male Frequency RangeDC - 4GHz

Dummy Loads

Find the right RF tool