Test & Measurement

The RF Series OLED RF Power Meter is a high-performance, portable RF power meter with a 0.96" OLED display (128x64 pixels) and selectable models for 500MHz, 3GHz, or 8GHz frequency ranges. Powered by micro-USB (5V), it features compact size, high accuracy, fast measurement, and a wide...

The TinySA ULTRA Plus ZS-406 redefines portable RF analysis with lab-grade performance in a compact handheld device. Featuring a 3.95" IPS-TFT touchscreen (480×320), it covers 900MHz–5.4GHz in Ultra Mode and delivers groundbreaking sensitivity down to -169dBm/Hz with LNA enabled....

The N1201SA+ is a handheld RF vector impedance analyzer covering 34.375 MHz to 2700 MHz . Its 2.4″ TFT display delivers real-time readings of resistance (R), reactance (X), SWR, and S11. Powered by a 2000 mAh internal battery or USB charger, it’s ideal for field and lab measurements with...

The TinyPFA Portable Phase Frequency Analyzer is a precision instrument designed for measuring phase and frequency differences between two input signals with exceptional accuracy. Operating across 1 MHz to 300 MHz, it's ideal for clock synchronization testing, RF analysis, and precision...

The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...

This 100W RF Dummy Load provides a stable 50 Ohm termination for testing high-power transmitters, walkie talkies, shortwave radios, FM stations, and RF equipment across DC-3GHz . Connected between your radio and SWR/power meter, it delivers accurate power measurements by replacing...

The 200W DC-3GHz Coaxial Dummy Load with N-Type female connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while...

The DL-50A 50 Ohm Dummy Load is designed for accurate power and SWR testing of radio stations, walkie talkies, and RF equipment over a wide DC–1000MHz frequency range. Connected to an SWR/power meter or directly to the radio, it provides a stable 50 Ohm termination and converts RF energy...

The DL-30A 50 Ohm Coaxial Dummy Load is designed to provide a stable RF termination for testing transmitters, antenna ports, and RF equipment over a wide DC–500MHz frequency range. Connected in place of an antenna or feeder, it safely absorbs RF power and simplifies bench and field...

The DL-30A Plus 50 Ohm Coaxial Dummy Load is designed as a stable RF terminator for walkie talkies, mobile radios, and test equipment over a wide DC–800MHz frequency range. Connected in place of an antenna, it simulates the antenna feeder and safely absorbs RF power, making on-bench or...

This 100W RF Dummy Load with UHF PL259 male connector provides a precise 50 Ohm termination for testing high-power transmitters, antennas, and RF equipment across DC-1GHz . Perfect for ham radio operators, CB radio technicians, and RF service shops, it safely absorbs RF power during SWR...

The 200W DC-3GHz Coaxial Dummy Load with N-Type male connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while enabling...

This 10W SMA Male Dummy Load delivers precise 50 Ohm RF termination for testing transmitters, antennas, and RF equipment across the full DC-3GHz spectrum. Ideal for lab bench testing, production quality control, and field service, it provides a stable load that safely absorbs RF power...

This 2W DC-6GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the full DC to 6GHz frequency spectrum. Perfect for lab work, production testing, and field service, it safely absorbs RF power while maintaining...

This 10W N-Type Male Dummy Load provides a precise 50 Ohm termination for RF testing, antenna port protection, and transmitter evaluation across a wide DC–3GHz frequency range. Designed as a high-quality coaxial load, it safely absorbs RF power and simulates antenna impedance for accurate...

This 25W DC-4GHz N Male Dummy Load provides precise 50 Ohm RF termination for testing professional RF equipment, base stations, amplifiers, and microwave systems across the full DC to 4GHz spectrum. With robust power handling and excellent VSWR characteristics, it's ideal for laboratory...

This 2W DC-4GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the DC to 4GHz frequency spectrum. Perfect for microwave lab work, production testing, and field service, it safely absorbs RF power while maintaining...