bladeRF x115 USB 3.0 Software Defined Radio 300MHz–3.8GHz 40MSPS 115KLE Cyclone IV FPGA SDR
Acestea sunt câteva dintre metodele de livrare pe care le folosim. Totuși, disponibilitatea și timpul de livrare pot varia în funcție de țara dvs.
- Protecția comenzii: Dacă comanda ta se pierde, îți garantăm un înlocuitor sau o rambursare. Se aplică termeni și condiții.
- Retururi ușoare: Bucură-te de un proces de retur simplu și fără bătăi de cap.
- Plăți flexibile: Alege dintre mai multe opțiuni de plată sigure, potrivite nevoilor tale.
- Prețuri avantajoase: Obține cea mai bună valoare pentru toate produsele noastre.
The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling. Built around a 115KLE Altera Cyclone IV FPGA, the bladeRF x115 delivers the performance and flexibility needed for custom RF modems, cellular base stations, satellite and GNSS experiments, and advanced SDR research.
Out of the box, the bladeRF x115 connects via USB 3.0 Superspeed using a Cypress FX3 controller, providing high‑throughput, low‑latency streaming that can saturate the 5Gbps link. With support for GNU Radio, SDR#, GQRX and other popular SDR applications, it can be used immediately as a wideband RX/TX front end. All host software, firmware, and HDL are open‑source and available on GitHub, making it ideal for education, research, and commercial development.
Key Features
- Frequency range: 300MHz – 3.8GHz without extra boards
- Sample rate: Full‑duplex 40MSPS, 12‑bit I/Q
- FPGA: 115KLE Altera Cyclone IV with DSP blocks and embedded memory
- RF transceiver: LimeMicro LMS6002D wideband RF IC
- TX power: typically around +6dBm
- Clock: factory‑calibrated VCTCXO trimmed to within 1Hz of 38.4MHz
- RF shields: removable‑cap RF shielding for improved sensitivity and isolation
- Clocking architecture: flexible for arbitrary sample rates and external sync
- Expansion: GPIO expansion port (compatible with GPIO Expansion Board)
- Headless mode: on‑board SPI flash for standalone, PC‑free operation
Software & Applications
- Open‑source ecosystem: host software, firmware, and HDL on GitHub
- Supported tools: GNU Radio, live images, and other common SDR stacks
- Example uses: GSM/LTE picocell, GPS receiver, ATSC transmitter, Bluetooth/Wi‑Fi client, custom RF protocols
Performance & Expansion
- Bandwidth: up to 28MHz of clean RF bandwidth over the operating range
- HF/VHF support: extended coverage with the optional XB‑200 Transverter Board
- Mechanical & design files: schematics and DXF mechanical files available for integration
Kit Contents
- 1 × bladeRF x115 (115KLE Cyclone IV FPGA)
- 1 × USB 3.0 Superspeed cable
- 2 × SMA RF cables
With its combination of wide tuning range, high sample rate, open‑source toolchain and a large Cyclone IV FPGA, the bladeRF x115 is a proven platform for SDR labs, wireless research, protocol development, and serious RF hobby work.
No questions yet
Nu au fost găsite recenzii
