XB-200 LF/MF/HF/VHF Transverter 60kHz–300MHz for bladeRF x40 x115 SDR Expansion Board
Acestea sunt câteva dintre metodele de livrare pe care le folosim. Totuși, disponibilitatea și timpul de livrare pot varia în funcție de țara dvs.
- Protecția comenzii: Dacă comanda ta se pierde, îți garantăm un înlocuitor sau o rambursare. Se aplică termeni și condiții.
- Retururi ușoare: Bucură-te de un proces de retur simplu și fără bătăi de cap.
- Plăți flexibile: Alege dintre mai multe opțiuni de plată sigure, potrivite nevoilor tale.
- Prețuri avantajoase: Obține cea mai bună valoare pentru toate produsele noastre.
The XB-200 LF/MF/HF/VHF Transverter dramatically expands the frequency coverage of bladeRF 1.0 x40 and x115 SDRs down to 60kHz–300MHz, enabling low-frequency applications like LF/MF/HF amateur radio, VLF research, and shortwave monitoring. This block up/down-converter adds seamless HF/VHF capability while preserving the bladeRF's native 300MHz–3.8GHz range through intelligent RF bypass switching.
Featuring low-insertion-loss RF switches, the XB-200 allows instant toggling between transverted low frequencies and the bladeRF's direct range—no need to unplug or reconfigure. High-Q, low-ESR passive components ensure excellent filter performance across three dedicated bands: 50–54MHz (6m), 149–159MHz, and 206–235MHz. Additional SMA filter ports allow custom band filtering for specialized applications.
Key Features
- Frequency extension: 60kHz – 300MHz LF/MF/HF/VHF coverage
- Pre-filtered bands: 50–54MHz (6m), 149–159MHz, 206–235MHz
- RF bypass switch: low-loss pass-through for native bladeRF frequencies
- LO synthesizer: ADF4351 with low phase noise, references bladeRF VCTCXO
- RF path: high-Q, low-ESR passives (≤2% tolerance) for superior filtering
- Custom filtering: external SMA ports for user-defined band filters
- GPIO control: 16 configurable pins (C API and HDL) for amps, filters, antennas
Compatibility & Integration
- Supported SDRs: bladeRF 1.0 x40 and x115 only
- Seamless operation: RX at 1MHz while TX at 3GHz simultaneously
- Shielded design: LO synthesizer and RF paths fully enclosed
Control & Operation
- RF bypass: software-controlled switching between transvert and direct modes
- GPIO pins: programmable via bladeRF C API and FPGA HDL for external control
- Reference clock: uses bladeRF's factory-calibrated 38.4MHz VCTCXO
Kit Contents
- 1 × XB-200 LF/MF/HF/VHF Transverter (60kHz–300MHz)
The XB-200 transforms your bladeRF into a complete LF-to-microwave SDR platform, perfect for amateur radio DXing, VLF signal hunting, shortwave listening, 6-meter operations, and low-frequency research—all with professional-grade filtering and seamless frequency range switching.
No questions yet
Nu au fost găsite recenzii
