Newest Products

The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...

The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 115KLE Altera Cyclone IV FPGA , the bladeRF x115 delivers the performance and flexibility needed for custom RF...

The BT-200 Bias-Tee Low Noise Amplifier is a wideband RX LNA designed specifically for bladeRF SDR platforms, providing a simple way to dramatically lower system noise figure and increase receive sensitivity. Featuring a Mini-Circuits TSS-53LNB+ MMIC , the BT-200 delivers ultra low noise...

The BT‑100 Bias‑Tee Power Amplifier is a wideband TX amplifier designed specifically for the bladeRF 2.0 micro and classic bladeRF xA4/xA5/xA9 SDR platforms. Featuring a Mini‑Circuits PHA‑1H+ MMIC , it delivers clean gain from 50MHz to 6GHz , ideal as an intermediary or final stage in...

The bladeRF 2.0 micro xA9 THERMAL is a next‑generation software defined radio (SDR) covering 47MHz to 6GHz with a 61.44MSPS sampling rate and full 2×2 MIMO . Designed for serious RF developers, researchers, and wireless security professionals, it combines wideband performance, low...

The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...

The world's only UHF RFID deactivation device. The UHFKill is specifically built for UHF (Ultra High Frequency) RFID Tags used in the wholesale apparel / footware / eyeware markets for inventory tracking. Instantly disable embedded UHF RFID Tags without damaging the...

The PortaRF is an advanced, open-source hardware platform that merges the powerful HackRF One with the versatile PortaPack H4M into a single, portable device. Covering an extensive frequency range from 1 MHz to 6 GHz , the PortaRF offers standalone software defined radio capabilities...

The TinyPFA Portable Phase Frequency Analyzer is a precision instrument designed for measuring phase and frequency differences between two input signals with exceptional accuracy. Operating across 1 MHz to 300 MHz, it's ideal for clock synchronization testing, RF analysis, and precision...

This 30 MHz – 6.5 GHz Ultra‑Wideband RF Power Amplifier delivers high linear gain and stable performance across a broad frequency range. Featuring 36 dB of gain and a saturated output power of 33 dBm (≈ 2 W), it’s ideal for general‑purpose RF testing, laboratory signal amplification, and...

The AIFW WaveSentry and WaveSentry Pro are all‑in‑one portable ESP32‑based diagnostic tools built from the foundation of the ESP32 Marauder and redesigned with a custom hardware platform. Compact, versatile, and made for network professionals and electronics enthusiasts alike, these units...

This  B210 AD9361 Software Defined Radio is a fully featured SDR platform covering 70MHz to 6GHz in full duplex with 2x2 MIMO. Built for precision and performance, it integrates the AD9361 RFIC, USB 3.0 interface, and FPGA (XC6SLX150), supporting 61.44MHz RF bandwidth and 12-bit...

The RTL-SDR Blog V3 USB-C is a versatile rtl sdr dongle featuring the R860 (R820T2) tuner and RTL2832U chipset. This model includes a 1PPM TCXO for frequency accuracy, SMA F connector, and an aluminum case with passive cooling. It tunes from 500 kHz to 1.7 GHz with up to 3.2 MHz bandwidth...

The LILYGO T5S3 Pro is a modern e-paper development board combining a crisp 4.7-inch display with 16 gray levels and ultra-low power operation. Featuring the powerful ESP32-S3 with 16MB flash and 8MB PSRAM, this board offers robust wireless options—2.4GHz WiFi, Bluetooth 5, and an SX1262...

The LILYGO TTGO MySondy GO V2.1 is a compact and versatile receiver designed for RadioSonde signal acquisition and IoT applications. Built on the ESP32 platform with 4MB flash memory, it delivers reliable wireless connectivity through integrated WiFi 802.11 and Bluetooth V4.2 + LE. The device...

The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...

The LibreSDR B210 Mini / B220 Mini is a compact, full-featured software-defined radio (SDR) development board, fully compatible with B210 on Windows and Linux. Two models are available: B210 Mini (XC7A100T+AD9363) and B220 Mini (XC7A200T+AD9361); both offer the same functions but differ in...

The 1.6-50MHz PWR SWR Meter offers precise power and standing wave ratio measurements across a wide frequency range of 1.6 to 50MHz. With a power measurement range of 0.5 to 150W and an accuracy better than ±5%, it is ideal for amateur radio operators and RF enthusiasts. Featuring a...

The REDOT RD106P Digital SWR & Power Meter is a versatile, portable tool for FM, VHF, and UHF (80–999MHz) with max 120W power and VSWR display from 1.00 to 99.9. It supports DMR walkie talkies and RF devices, offering continuous and burst sampling, frequency compensation, and automatic...

The RF Power Meter V7.0 is a high-performance, portable RF power meter supporting signals up to 10GHz. It features a 1.3-inch TFT LCD, built-in lithium battery for offline use, and a robust CNC aluminum alloy housing. With Type-C USB for power and high-speed data, and an N-type male RF...