Newest Products

The LILYGO T-Display S3 AMOLED is a compact ESP32-S3 development board with a bright 1.91-inch AMOLED display, wireless connectivity, onboard battery management, and a small form factor for portable electronics, IoT projects, wearables, dashboards, and embedded prototypes. Based on the...

The PlutoSky R2 Zynq-7020 AD9363 is an upgraded PlutoSDR-compatible software-defined radio platform designed for RF development, signal analysis, FPGA experimentation, and high-speed data transmission. This version is equipped with the AD9363 RF transceiver and is supplied without a power...

The HackRF Pro Development Board is an upgraded software-defined radio transceiver designed for RF testing, signal analysis, prototyping, and SDR development. With wide frequency coverage from 100kHz to 6GHz and an adjustable range up to 7.1GHz, it is suitable for a broad range of receiving and...

The AIDOSDR A3 is an open source software defined radio (SDR) development board built around a powerful Zynq7020 SoC + AD9363 RF transceiver combination, offering 2 transmit and 2 receive channels in a compact, integrated design. Positioned as a high-end upgrade path for Pluto-class...

The USRP B210 Kintex-7 FPGA Board is an enhanced version of the classic USRP B210 software defined radio, featuring a modern Xilinx Kintex-7 FPGA upgrade over the original Spartan-6. Optimized for Vivado development with USB 3.0 Type-C delivering up to 56MHz real-time bandwidth , this...

The 200W DC-3GHz Coaxial Dummy Load with N-Type female connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while...

The 200W DC-3GHz Coaxial Dummy Load with N-Type male connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while enabling...

This 25W DC-4GHz N Male Dummy Load provides precise 50 Ohm RF termination for testing professional RF equipment, base stations, amplifiers, and microwave systems across the full DC to 4GHz spectrum. With robust power handling and excellent VSWR characteristics, it's ideal for laboratory...

This 100W RF Dummy Load with UHF PL259 male connector provides a precise 50 Ohm termination for testing high-power transmitters, antennas, and RF equipment across DC-1GHz . Perfect for ham radio operators, CB radio technicians, and RF service shops, it safely absorbs RF power during SWR...

This 10W SMA Male Dummy Load delivers precise 50 Ohm RF termination for testing transmitters, antennas, and RF equipment across the full DC-3GHz spectrum. Ideal for lab bench testing, production quality control, and field service, it provides a stable load that safely absorbs RF power...

This 100W RF Dummy Load provides a stable 50 Ohm termination for testing high-power transmitters, walkie talkies, shortwave radios, FM stations, and RF equipment across DC-3GHz . Connected between your radio and SWR/power meter, it delivers accurate power measurements by replacing...

This 2W DC-4GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the DC to 4GHz frequency spectrum. Perfect for microwave lab work, production testing, and field service, it safely absorbs RF power while maintaining...

This 2W DC-6GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the full DC to 6GHz frequency spectrum. Perfect for lab work, production testing, and field service, it safely absorbs RF power while maintaining...

This 10W N-Type Male Dummy Load provides a precise 50 Ohm termination for RF testing, antenna port protection, and transmitter evaluation across a wide DC–3GHz frequency range. Designed as a high-quality coaxial load, it safely absorbs RF power and simulates antenna impedance for accurate...

The DL-50A 50 Ohm Dummy Load is designed for accurate power and SWR testing of radio stations, walkie talkies, and RF equipment over a wide DC–1000MHz frequency range. Connected to an SWR/power meter or directly to the radio, it provides a stable 50 Ohm termination and converts RF energy...

The DL-30A Plus 50 Ohm Coaxial Dummy Load is designed as a stable RF terminator for walkie talkies, mobile radios, and test equipment over a wide DC–800MHz frequency range. Connected in place of an antenna, it simulates the antenna feeder and safely absorbs RF power, making on-bench or...

The DL-30A 50 Ohm Coaxial Dummy Load is designed to provide a stable RF termination for testing transmitters, antenna ports, and RF equipment over a wide DC–500MHz frequency range. Connected in place of an antenna or feeder, it safely absorbs RF power and simplifies bench and field...

The XB-200 LF/MF/HF/VHF Transverter dramatically expands the frequency coverage of bladeRF 1.0 x40 and x115 SDRs down to 60kHz–300MHz , enabling low-frequency applications like LF/MF/HF amateur radio, VLF research, and shortwave monitoring. This block up/down-converter adds seamless...

The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...

The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 115KLE Altera Cyclone IV FPGA , the bladeRF x115 delivers the performance and flexibility needed for custom RF...