+3197010267156

SIGNAL BOOST WEEK ⚡

Save 5% Storewide for a limited time.

Upgrade your SDR, RF or test setup and save across the store.

Promotion expires within:

Promotion period: from 09/14/2026 to 09/21/2026

SDR2-SRPN-CWXSRT
0.0
In stock
18,46562 19,43749 -5%
+
The SDR 2974 is a high-performance embedded Software Defined Radio (SDR) platform, ideal for advanced wireless prototyping and research. Featuring 2 TX/RX channels , a frequency range of 10 MHz–44 GHz , and up to 160 MHz bandwidth per channel , it is powered by an Intel i7 processor...
5WLN-MPLF-VF1CEA
0.0
In stock
13715 14437 -5%
+
The 5W Linear RF Broadband HF Amplifier delivers low-distortion signal amplification across 100KHz–60MHz. With 37dB gain and configurable output (4W@12V, 6W@15V), it's perfect for TPMS, wireless charging, research labs, and amateur radio projects requiring clean signal boosting. Key...
45-6-MPLF-XNTZPG
0.0
In stock
10815 11385 -5%
+
This 45-650MHz 10W Wide Band RF Power Amplifier is a reliable accessory for boosting radio and RF signals across a broad frequency range. Designed for high quality and stable output, it delivers up to 10W of power (40dBm) at 24V with a recommended input of 5dBm. The amplifier uses a standard...
100K-MPLF-ZK2MXY
0.0
In stock
21079 22188 -5%
+
The 100kHz-3MHz 50W RF Power Amplifier is a linear, low-distortion amplifier designed for medium/long wave and HF applications. With 50W output and 47dB gain, it boosts signals for TPMS, wireless charging, remote controls, research, and amateur radio projects. Key Specifications...
The TinySA ULTRA Plus ZS-406 redefines portable RF analysis with lab-grade performance in a compact handheld device. Featuring a 3.95" IPS-TFT touchscreen (480×320), it covers 900MHz–5.4GHz in Ultra Mode and delivers groundbreaking sensitivity down to -169dBm/Hz with LNA enabled....
The AIFW WaveSentry and WaveSentry Pro are all‑in‑one portable ESP32‑based diagnostic tools built from the foundation of the ESP32 Marauder and redesigned with a custom hardware platform. Compact, versatile, and made for network professionals and electronics enthusiasts alike, these units...
EditionWaveSentry
MCRP-FPGB-FQDRCX
0.0
In stock
1,11974 1,17867 -5%
+
The MicroPhase XME7100 is an industrial-grade Xilinx Zynq-7000 FPGA core board available with either the XC7Z035-2FFG676I (275K logic cells) or the XC7Z100-2FFG9001 (444K logic cells) module, delivering up to 2,020 DSP slices and 16 GTX transceiver channels , with PCIe 2.0×8 host...
FNSH-MPLF-QZRW1L
0.0
In stock
3817 4018 -5%
+
The Finished Board A 30W Shortwave Power Amplifier is a compact linear HF amplifier for CW and SSB operation across 3–28MHz. With up to 30W output at 7MHz (0.1–3W input), it’s ideal for amateur radio, labs, and educational use. The board features automatic TX/RX switching and runs on DC...
SRPN-SRPZ-DPF8KG
0.0
In stock
19,09140 20,09621 -5%
+
The  USRP N321 is a high-performance networked Software Defined Radio (SDR) platform, designed for reliability and fault tolerance in large-scale and distributed wireless systems. It features 2 TX and 2 RX channels , each supporting up to 200 MHz instantaneous bandwidth across a...
The PortaRF is an advanced, open-source hardware platform that merges the powerful HackRF One with the versatile PortaPack H4M into a single, portable device. Covering an extensive frequency range from 1 MHz to 6 GHz , the PortaRF offers standalone software defined radio capabilities...
BundleWith Extension Board
300M-MPLF-H5WG2Q
0.0
In stock
12724 13393 -5%
+
The 300MHz 60W Extended Range RF Power Amplifier is designed to boost the signal of 285–315MHz devices, extending communication range and improving clarity. With 60W output and half-duplex operation, it’s ideal for handheld U-band walkie talkies, data transmission, and EMC testing. The...
LWVL-RFDG-JWHXJB
0.0
In stock
28911 30432 -5%
+
The Luowave LFTX/RX-LW is a low-cost SDR daughterboard designed for HF communication and direct ADC access. Covering 0–30 MHz , it supports both real and quadrature (I/Q) signals and is compatible with USRP N210 and X310 devices. Key Features and Specifications...
SSMB-MPLF-TXFYAU
0.0
In stock
16397 17260 -5%
+
The Assembled MiNi 100W HF Power Amplifier (MiniPA100) is a compact, high-performance solution for shortwave radio enthusiasts. Designed for 1.8–30MHz HF bands, it delivers 100W output with just 5W input, powered by a 13.8–16V DC supply (max 13A current). Key Features...
433M-MPLF-RHRPIN
0.0
In stock
9331 9822 -5%
The 433MHz 40W / 915MHz 30W RF Power Amplifier is a high-quality RF accessory designed for reliable signal boosting. It operates within 433±40MHz and 915MHz frequency bands, delivering output powers of 40W+ and 30W respectively. Powered by a 24-28V power supply with a recommended voltage of...
Model433Mhz 40W
LILYGO T-SIM7080G-S3 is a compact board made for IoT and low-power mobile data projects. It uses an ESP32-S3 chip and the SIM7080G module, so you get Cat-M and NB-IoT cellular support, WiFi, Bluetooth 5.0, and GPS all in one. With 16MB Flash and 8MB PSRAM, it handles multitasking and data...
ModelCE
N120-SPCT-BVQ1DT
0.0
In stock
10546 11101 -5%
+
The N1201SA+ is a handheld RF vector impedance analyzer covering 34.375 MHz to 2700 MHz . Its 2.4″ TFT display delivers real-time readings of resistance (R), reactance (X), SWR, and S11. Powered by a 2000 mAh internal battery or USB charger, it’s ideal for field and lab measurements with...
Connector TypeSMA
This 30 MHz – 6.5 GHz Ultra‑Wideband RF Power Amplifier delivers high linear gain and stable performance across a broad frequency range. Featuring 36 dB of gain and a saturated output power of 33 dBm (≈ 2 W), it’s ideal for general‑purpose RF testing, laboratory signal amplification, and...
The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...
BLDR-BLDR-VD056K
0.0
In stock
1,95847 2,06155 -5%
+
The bladeRF 2.0 micro xA9 THERMAL is a next‑generation software defined radio (SDR) covering 47MHz to 6GHz with a 61.44MSPS sampling rate and full 2×2 MIMO . Designed for serious RF developers, researchers, and wireless security professionals, it combines wideband performance, low...
The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...
Connector TypeSMA
Show other 20 products
Product filters
Connector Type
Power
Frequency Range
ADC resolution
bit
bit
  • 12bit
  • 16bit
Amplifier type
Bias tee
Built-in battery
Chip / platform
Compatible USRP models
DAC resolution
bit
bit
  • 12bit
  • 16bit
Display type
FPGA logic elements
kLE
kLE
  • 40kLE
  • 33280kLE
Frequency maximum
MHz
MHz
  • 30MHz
  • 6000MHz
Frequency minimum
MHz
MHz
  • 0MHz
  • 5000MHz
Gain
dB
dB
  • 20dB
  • 60dB
GPS
Host and data interfaces
    Show all (18)
Instantaneous bandwidth
Product type
    Show all (25)
Receive channels
channels
channels
  • 1channels
  • 8channels
RF capability
RF transceiver chipset
RX maximum frequency
MHz
MHz
  • 30MHz
  • 6000MHz
RX minimum frequency
MHz
MHz
  • 0MHz
  • 400MHz
Standard sample rate
MSPS
MSPS
  • 40MSPS
  • 62MSPS
Supported duplex modes
Supported frequency bands
Synchronization options
    Show all (12)
TDR / cable fault measurement
Transmit channels
channels
channels
  • 1channels
  • 8channels
TX maximum frequency
MHz
MHz
  • 30MHz
  • 6000MHz
TX minimum frequency
MHz
MHz
  • 0MHz
  • 400MHz
Version
Wi‑Fi band