RF Test & Measurement Equipment | SDRstore.eu

N1201SA+ RF Vector Impedance Analyzer | 34.4 MHz–2.7 GHz

0.0

CODE:

N120-SPCT-BVQ1DT

The N1201SA+ is a handheld RF vector impedance analyzer covering 34.375 MHz to 2700 MHz . Its 2.4″ TFT display delivers real-time readings of resistance (R), reactance (X), SWR, and S11. Powered by a 2000 mAh internal battery or USB charger, it’s ideal for field and lab measurements with...

Connector TypeSMA

€111⁰¹ €143⁴¹ -23%

In stock

+ −

LibreVNA 2.0 100kHz–6GHz USB Vector Network Analyzer Full 2‑Port VNA with Calibration Kit

0.0

CODE:

LBRV-SPCT-V8WQ8F

The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...

Connector TypeSMA

€1,128⁹⁵ €1,374³⁷ -18%

In stock

+ −

TinyPFA Portable Phase Frequency Analyzer 1MHz-300MHz 10MHz Clock Measurement Precision Phase Analyzer

0.0

CODE:

TNYP-SPCT-JT9DGD

The TinyPFA Portable Phase Frequency Analyzer is a precision instrument designed for measuring phase and frequency differences between two input signals with exceptional accuracy. Operating across 1 MHz to 300 MHz, it's ideal for clock synchronization testing, RF analysis, and precision...

€78⁵⁴

In stock

+ −

100W RF Dummy Load DC-3GHz 50 Ohm N-Male Connector Walkie Talkie Shortwave Radio Terminator

0.0

CODE:

100W-DMMY-3YC9OR

This 100W RF Dummy Load provides a stable 50 Ohm termination for testing high-power transmitters, walkie talkies, shortwave radios, FM stations, and RF equipment across DC-3GHz . Connected between your radio and SWR/power meter, it delivers accurate power measurements by replacing...

Connector TypeN Male Frequency RangeDC - 3GHz

€66⁷⁶

In stock

+ −

100W RF Dummy Load DC-1GHz 50 Ohm UHF PL259 Male Coaxial Terminator

0.0

CODE:

100W-DMMY-FLS5HV

This 100W RF Dummy Load with UHF PL259 male connector provides a precise 50 Ohm termination for testing high-power transmitters, antennas, and RF equipment across DC-1GHz . Perfect for ham radio operators, CB radio technicians, and RF service shops, it safely absorbs RF power during SWR...

Connector TypeUHF PL259 Male Frequency RangeDC - 1000MHz

€67⁷⁴

In stock

+ −

2W DC-6GHz 50 Ohm RF Dummy Load SMA Male High Quality Coaxial Termination Load

0.0

CODE:

2WDC-DMMY-DDR6MU

This 2W DC-6GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the full DC to 6GHz frequency spectrum. Perfect for lab work, production testing, and field service, it safely absorbs RF power while maintaining...

Connector TypeSMA Male Frequency RangeDC - 6GHz

€34³⁶

In stock

+ −

DL-30A 50 Ohm DC–500MHz Coaxial Dummy Load Antenna SMA Male 15W RF Terminator

0.0

CODE:

DL-3-DMMY-VS7GBI

The DL-30A 50 Ohm Coaxial Dummy Load is designed to provide a stable RF termination for testing transmitters, antenna ports, and RF equipment over a wide DC–500MHz frequency range. Connected in place of an antenna or feeder, it safely absorbs RF power and simplifies bench and field...

Connector TypeSMA Male Frequency RangeDC – 500MHz

€54⁹⁷

In stock

+ −

10W N-Type Male 50 Ohm DC–3GHz Coaxial Dummy Load RF Terminator Radio Test Accessory

0.0

CODE:

10WN-DMMY-HRYFKE

This 10W N-Type Male Dummy Load provides a precise 50 Ohm termination for RF testing, antenna port protection, and transmitter evaluation across a wide DC–3GHz frequency range. Designed as a high-quality coaxial load, it safely absorbs RF power and simulates antenna impedance for accurate...

Connector TypeN Male Frequency RangeDC - 3GHz

€32⁴⁰

In stock

+ −

DL-50A 50 Ohm DC–1000MHz 100W Dummy Load M Male for SWR Meter and Walkie Talkie Testing

0.0

CODE:

DL-5-DMMY-DSL2P0

The DL-50A 50 Ohm Dummy Load is designed for accurate power and SWR testing of radio stations, walkie talkies, and RF equipment over a wide DC–1000MHz frequency range. Connected to an SWR/power meter or directly to the radio, it provides a stable 50 Ohm termination and converts RF energy...

Connector TypeM Male Frequency RangeDC - 1000MHz

€87³⁷

In stock

+ −

200W DC-3GHz 50 Ohm Coaxial Dummy Load N-Type Male for Walkie Talkie Mobile Radio Testing

0.0

CODE:

200W-DMMY-6VBL1W

The 200W DC-3GHz Coaxial Dummy Load with N-Type male connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while enabling...

Connector TypeN Male Frequency RangeDC - 3GHz

€89³³

In stock

+ −

DL-30A Plus 50 Ohm DC–800MHz Coaxial Dummy Load SMA Male 25W RF Terminator

0.0

CODE:

DL-3-DMMY-PDJSON

The DL-30A Plus 50 Ohm Coaxial Dummy Load is designed as a stable RF terminator for walkie talkies, mobile radios, and test equipment over a wide DC–800MHz frequency range. Connected in place of an antenna, it simulates the antenna feeder and safely absorbs RF power, making on-bench or...

Connector TypeSMA Male Impedance50

€57⁹²

In stock

+ −

10W SMA Male 50 Ohm DC-3GHz RF Dummy Load Coaxial Terminator Radio Test Accessory

0.0

CODE:

10WS-DMMY-ZDRKHG

This 10W SMA Male Dummy Load delivers precise 50 Ohm RF termination for testing transmitters, antennas, and RF equipment across the full DC-3GHz spectrum. Ideal for lab bench testing, production quality control, and field service, it provides a stable load that safely absorbs RF power...

Connector TypeSMA Male Frequency RangeDC - 3GHz

€37³⁰

In stock

+ −

2W DC-4GHz 50 Ohm RF Dummy Load SMA Male High Quality Coaxial Termination Load

0.0

CODE:

2WDC-DMMY-GSQHKT

This 2W DC-4GHz RF Dummy Load provides precise 50 Ohm termination for RF testing, equipment evaluation, and antenna port protection across the DC to 4GHz frequency spectrum. Perfect for microwave lab work, production testing, and field service, it safely absorbs RF power while maintaining...

Connector TypeSMA Male Frequency RangeDC - 4GHz

€35³⁴

In stock

+ −

200W DC-3GHz 50 Ohm Coaxial Dummy Load N-Type Female for Walkie Talkie Mobile Radio

0.0

CODE:

200W-DMMY-Z8XWKC

The 200W DC-3GHz Coaxial Dummy Load with N-Type female connector is designed for testing high-power radio transmitters, mobile radios, walkie talkies, and RF systems across the full DC-3GHz frequency range. It provides a precise 50 Ohm termination that absorbs RF power safely while...

Connector TypeN Female Frequency RangeDC - 3GHz

€101¹¹

In stock

+ −

25W DC-4GHz 50 Ohm N Male RF Dummy Load High Quality Coaxial Terminator

0.0

CODE:

25WD-DMMY-DNHCR0

This 25W DC-4GHz N Male Dummy Load provides precise 50 Ohm RF termination for testing professional RF equipment, base stations, amplifiers, and microwave systems across the full DC to 4GHz spectrum. With robust power handling and excellent VSWR characteristics, it's ideal for laboratory...

Connector TypeN Male Frequency RangeDC - 4GHz

€50⁰⁷

In stock

+ −

Seeed Studio RF Explorer Pro Touchscreen Spectrum Analyzer 15MHz–7.5GHz

0.0

CODE:

SDST-SPCT-DSQBE5

€1,109³¹ €1,178⁰³ -6%

In stock

+ −

HFDY 1.10D Firmware Enhanced Version 50KHz-2GHz Malachite SDR Receiver Radio Malahilteam DSP

0.0

CODE:

HFDY-SPCT-6HYTZQ

Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...

€246⁶⁵ €291⁷⁰ -15%

Out of stock

Mini1300 0.1–1300 MHz HF/VHF/UHF Spectrum Analyzer | 4.3″ Touchscreen

0.0

CODE:

MN13-SPCT-HR83FZ

The Mini1300 is a handheld spectrum analyzer covering 0.1–1300 MHz for HF, VHF, and UHF bands. Housed in a rugged aluminum alloy shell with a 4.3″ capacitive touchscreen , it delivers real-time spectral displays, SWR, impedance (|Z|, R, ±JX), and return-loss measurements. Key...

Connector TypeN-type

€190⁶⁶ €210³⁰ -9%

Out of stock

Test & Measurement

Find the right RF tool