On sale - SDRstore.eu

Meshtastic T-Beam ESP32 LoRa 433/868/915/923Mhz SX1276/SX1278 Wireless Module WiFi GPS NEO-6M With 0.96 inch OLED Display For Arduino. Specifications: GPS NE0-6M GPS Modules: Support GPS protocol Onboard RTC crystal, Support interrupt/ wakeup LoRa...

Difference Deauther OLED V6 Deauther Monster  18650 Battery 1 2 FlashLight LED 1 4 USB Output NO YES Arcylic Case YES YES Battery Indicate YES YES Charging Current 1A 1A Breakout GPIOs YES YES RTC DS3231 YES YES Antenna 8dB 8dB Weight...

USRP B210 is a highly integrated, dual-channel USB Software Defined Radio (SDR) platform, perfect for advanced wireless research, IoT prototyping, and SDR development. Powered by the Analog Devices AD9361 RFIC , it supports 2x2 MIMO operation and covers a continuous frequency range from...

Malachite radio with medium and short wave option, dual antenna input, malahiteam DSP, 1) Based on SDR architecture, msi001 RF front-end is used for 12bit quantitative sampling, stm32h743 processor is used, and the main frequency is up to 480mhz; 2) The receiving frequency is 50 kHz to...

LILYGO TTGO T-SIM7000G is a small board for IoT and NB-IoT projects. It runs on an ESP32 and supports SIM7000G, SIM7000E, SIM7000A, and SIM7000JC modules. You get WiFi, Bluetooth 4.2, GPS, and your choice of 4MB or 16MB flash with 8MB PSRAM. The board is updated with better battery...

• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...

The LILYGO TTGO MySondy GO V2.1 is a compact and versatile receiver designed for RadioSonde signal acquisition and IoT applications. Built on the ESP32 platform with 4MB flash memory, it delivers reliable wireless connectivity through integrated WiFi 802.11 and Bluetooth V4.2 + LE. The device...

The LILYGO T-WATCH-S3 Plus is a feature-rich ESP32-S3 smartwatch development board for IoT, wearables, and smart projects. It offers 16MB Flash, 8MB PSRAM, and supports Arduino-IDE, ESP-IDF, VS Code, and MicroPython. Wireless: Wi-Fi 802.11b/g/n, Bluetooth BLE 5.0, SX1262 LoRa...

The  SDR-LW 2972 is a versatile 2x2 MIMO Software Defined Radio (SDR) platform with AD9361 RFIC , supporting a frequency range of 70 MHz–44 GHz and 56 MHz bandwidth per channel . Featuring USB 3.0 connectivity and an Artix 7 XC7A200T FPGA , it enables high-speed data transfer...

Features: - Its performance indicators are consistent with the imported version, and its stability is better - Using industrial-grade chips, supporting temperature range -40 to 85℃ - Highly integrated, radio frequency ranges from 70MHz to 6GHz - Support maximum real-time bandwidth 56MHz,...

The LILYGO Meshtastic T-Beam SUPREME ESP32-S3 Development Board is a collaborative module from LILYGO and Meshtastic, designed for advanced IoT and LoRa experimentation. Powered by the ESP32-S3FN8 dual-core LX7 processor, it integrates a LoRa SX1262 module, GPS (U-blox MAX-M10S-00B or L76K),...

The NanoVNA VNA Vector Network Analyzer 2.8 inch LCD 50KHz-900MHz with Battery is a compact and portable vector network analyzer featuring a 2.8 inch TFT touch screen and a 400mAh built-in battery for offline use up to 2 hours. It supports a frequency range of 50KHz to 300MHz, extendable to...

The  USRP N310 is a networked Software Defined Radio (SDR) platform engineered for large-scale, distributed, and high-reliability wireless systems. Featuring four independent TX/RX channels with dual AD9371 RFICs , it delivers up to 100 MHz bandwidth per channel over a frequency...

• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...

The SBX-40/120 is a full-duplex wideband SDR daughterboard covering 400 MHz to 4.4 GHz with 40 MHz or 120 MHz instantaneous bandwidth . It delivers up to 100 mW output power and a typical noise figure of 5 dB , making it ideal for WiFi, WiMAX, S-band, ISM, and cellular applications...

The WBX-40/120 is a full-duplex wideband SDR daughterboard covering 50 MHz to 2.2 GHz with 40 MHz or 120 MHz instantaneous bandwidth . It delivers up to 100 mW output power and a typical noise figure of 5 dB , making it ideal for a wide range of RF applications. Key Features and...

The MicroPhase Mizar Zynq-7000 FPGA Development Board is available in two variants: 7010 (XC7Z010CLG400-1) with 28K logic cells and 667 MHz dual-core Cortex-A9, or 7020 (XC7Z020CLG400-2) with 85K cells and 766 MHz. It features 4 Gbit DDR3, 8 Gbit optional DDR3, and 256 Mbit QSPI flash...

• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...

The LILYGO® T-Embed ESP32-S3 CC1101 is a high-performance, low-power wireless module designed for IoT applications. Featuring a dual-core ESP32-S3 microprocessor, built-in 2.4 GHz Wi-Fi and BLE 5, and advanced RF capabilities with the CC1101 transceiver, this module is perfect for sub-1...

• Dual Band Ham Two Way Radio : This walkie talkie has both VHF and UHF bands, allowing you to communicate over a wider range of frequencies. • FM Radio : With an FM radio built-in, you can listen to your favorite stations while on the go. • Handheld Transceiver : The handheld design...