On sale - SDRstore.eu

The Luowave LFTX/RX-LW is a low-cost SDR daughterboard designed for HF communication and direct ADC access. Covering 0–30 MHz , it supports both real and quadrature (I/Q) signals and is compatible with USRP N210 and X310 devices. Key Features and Specifications...

The 433MHz 40W / 915MHz 30W RF Power Amplifier is a high-quality RF accessory designed for reliable signal boosting. It operates within 433±40MHz and 915MHz frequency bands, delivering output powers of 40W+ and 30W respectively. Powered by a 24-28V power supply with a recommended voltage of...

LILYGO T-SIM7080G-S3 is a compact board made for IoT and low-power mobile data projects. It uses an ESP32-S3 chip and the SIM7080G module, so you get Cat-M and NB-IoT cellular support, WiFi, Bluetooth 5.0, and GPS all in one. With 16MB Flash and 8MB PSRAM, it handles multitasking and data...

The N1201SA+ is a handheld RF vector impedance analyzer covering 34.375 MHz to 2700 MHz . Its 2.4″ TFT display delivers real-time readings of resistance (R), reactance (X), SWR, and S11. Powered by a 2000 mAh internal battery or USB charger, it’s ideal for field and lab measurements with...

This 30 MHz – 6.5 GHz Ultra‑Wideband RF Power Amplifier delivers high linear gain and stable performance across a broad frequency range. Featuring 36 dB of gain and a saturated output power of 33 dBm (≈ 2 W), it’s ideal for general‑purpose RF testing, laboratory signal amplification, and...

The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...

This HackRF Pro R1.2.1 with PortaPack H4M Pro Mayhem Signature Edition is a portable wideband SDR transceiver bundle designed for advanced signal analysis, RF testing, field operation, and SDR experimentation. It combines the upgraded HackRF Pro hardware platform with the Mayhem...

The bladeRF 2.0 micro xA9 THERMAL is a next‑generation software defined radio (SDR) covering 47MHz to 6GHz with a 61.44MSPS sampling rate and full 2×2 MIMO . Designed for serious RF developers, researchers, and wireless security professionals, it combines wideband performance, low...

The XB-200 LF/MF/HF/VHF Transverter dramatically expands the frequency coverage of bladeRF 1.0 x40 and x115 SDRs down to 60kHz–300MHz , enabling low-frequency applications like LF/MF/HF amateur radio, VLF research, and shortwave monitoring. This block up/down-converter adds seamless...

The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 115KLE Altera Cyclone IV FPGA , the bladeRF x115 delivers the performance and flexibility needed for custom RF...

The LibreVNA 2.0 Upgraded Version is a USB-based full 2-port vector network analyzer covering 100kHz to 6GHz , designed by Jankae for serious RF development, antenna tuning, and lab-grade measurements in a compact form. Using three simultaneous ADC channels and FPGA signal processing, it...

The AIDOSDR A3 is an open source software defined radio (SDR) development board built around a powerful Zynq7020 SoC + AD9363 RF transceiver combination, offering 2 transmit and 2 receive channels in a compact, integrated design. Positioned as a high-end upgrade path for Pluto-class...

The BT‑100 Bias‑Tee Power Amplifier is a wideband TX amplifier designed specifically for the bladeRF 2.0 micro and classic bladeRF xA4/xA5/xA9 SDR platforms. Featuring a Mini‑Circuits PHA‑1H+ MMIC , it delivers clean gain from 50MHz to 6GHz , ideal as an intermediary or final stage in...

The BT-200 Bias-Tee Low Noise Amplifier is a wideband RX LNA designed specifically for bladeRF SDR platforms, providing a simple way to dramatically lower system noise figure and increase receive sensitivity. Featuring a Mini-Circuits TSS-53LNB+ MMIC , the BT-200 delivers ultra low noise...

The USRP B210 Kintex-7 FPGA Board is an enhanced version of the classic USRP B210 software defined radio, featuring a modern Xilinx Kintex-7 FPGA upgrade over the original Spartan-6. Optimized for Vivado development with USB 3.0 Type-C delivering up to 56MHz real-time bandwidth , this...

The HackRF Pro Development Board is an upgraded software-defined radio transceiver designed for RF testing, signal analysis, prototyping, and SDR development. With wide frequency coverage from 100kHz to 6GHz and an adjustable range up to 7.1GHz, it is suitable for a broad range of receiving and...

The world's only UHF RFID deactivation device. The UHFKill is specifically built for UHF (Ultra High Frequency) RFID Tags used in the wholesale apparel / footware / eyeware markets for inventory tracking. Instantly disable embedded UHF RFID Tags without damaging the...

The PlutoSky R2 Zynq-7020 AD9363 is an upgraded PlutoSDR-compatible software-defined radio platform designed for RF development, signal analysis, FPGA experimentation, and high-speed data transmission. This version is equipped with the AD9363 RF transceiver and is supplied without a power...

The DSTIKE Deauther32 Watch MINI is a compact wearable Wi-Fi security testing and development device powered by the Espressif ESP32-C5 RISC-V MCU. As the next generation of the DSTIKE Deauther Watch series, it upgrades from older ESP8266-based hardware to a modern dual-band platform with support...

The DSTIKE AI Home Security Sidekick Lite is the ultra-compact USB version of the DSTIKE AI Home Security Sidekick Eve. Designed as a plug-and-play ESP32-S3 network monitoring companion, it brings AI-style desktop interaction, Wi-Fi security awareness, deauth detection, and a 1.3-inch color...