SDR Instruments

The RTL-SDR Blog V3 USB-C is a versatile rtl sdr dongle featuring the R860 (R820T2) tuner and RTL2832U chipset. This model includes a 1PPM TCXO for frequency accuracy, SMA F connector, and an aluminum case with passive cooling. It tunes from 500 kHz to 1.7 GHz with up to 3.2 MHz bandwidth...

The Luowave TwinRX-LW is a high-performance dual-channel superheterodyne receiver daughterboard for the USRP X310 . Covering 10 MHz to 6 GHz with 80 MHz bandwidth per channel , it delivers wide dynamic range and accurate phase synchronization for advanced spectrum monitoring and...

LILYGO T-SIM7080G-S3 is a compact board made for IoT and low-power mobile data projects. It uses an ESP32-S3 chip and the SIM7080G module, so you get Cat-M and NB-IoT cellular support, WiFi, Bluetooth 5.0, and GPS all in one. With 16MB Flash and 8MB PSRAM, it handles multitasking and data...

The TRX-duo is a high-performance dual channel software defined radio device designed for advanced SDR applications and remote deployment. Featuring two 16-bit ADCs (LTC2208) for direct sampling from 10 kHz to 60 MHz and two 14-bit DACs for dual channel transmission, it delivers outstanding...

The LILYGO Paxcounter LoRa V2.1_1.6.1 is a highly versatile, privacy-friendly IoT device designed for real-time passenger flow metering and advanced wireless sensing. Powered by an ESP32 microcontroller and supporting LoRa communication at 433/868/915MHz , this compact module can estimate...

The LILYGO TTGO T-SIM7070G is a compact and efficient development board designed for IoT and low-power wide-area network (LPWA) applications. Powered by an ESP32 MCU and the SIM7070G module, it supports Cat-M, Cat-NB, GPRS, and EDGE networks, making it suitable for global IoT deployments...

LILYGO Helium T-Beam V1.2 is a compact board for LoRaWAN, Helium, and GPS projects. It’s built around the ESP32, offers both 868MHz and 915MHz LoRa support, and includes a NEO-6M GPS for location tracking. The board runs on USB or a single 18650 battery, making it great for portable or outdoor...

The  USRP N210 is a high-performance 1x1 Software Defined Radio (SDR) platform designed for demanding communications and research. Covering DC to 6 GHz with up to 50 MS/s bandwidth via Gigabit Ethernet , it features a Xilinx Spartan3A-DSP3400 FPGA , dual-channel ADC (100 MSPS),...

This  B210 AD9361 Software Defined Radio is a fully featured SDR platform covering 70MHz to 6GHz in full duplex with 2x2 MIMO. Built for precision and performance, it integrates the AD9361 RFIC, USB 3.0 interface, and FPGA (XC6SLX150), supporting 61.44MHz RF bandwidth and 12-bit...

The SDR 2974 is a high-performance embedded Software Defined Radio (SDR) platform, ideal for advanced wireless prototyping and research. Featuring 2 TX/RX channels , a frequency range of 10 MHz–44 GHz , and up to 160 MHz bandwidth per channel , it is powered by an Intel i7 processor...

The  USRP N321 is a high-performance networked Software Defined Radio (SDR) platform, designed for reliability and fault tolerance in large-scale and distributed wireless systems. It features 2 TX and 2 RX channels , each supporting up to 200 MHz instantaneous bandwidth across a...

The AIFW WaveSentry and WaveSentry Pro are all‑in‑one portable ESP32‑based diagnostic tools built from the foundation of the ESP32 Marauder and redesigned with a custom hardware platform. Compact, versatile, and made for network professionals and electronics enthusiasts alike, these units...

The Luowave LFTX/RX-LW is a low-cost SDR daughterboard designed for HF communication and direct ADC access. Covering 0–30 MHz , it supports both real and quadrature (I/Q) signals and is compatible with USRP N210 and X310 devices. Key Features and Specifications...

LILYGO T-SIM7080G-S3 is a compact board made for IoT and low-power mobile data projects. It uses an ESP32-S3 chip and the SIM7080G module, so you get Cat-M and NB-IoT cellular support, WiFi, Bluetooth 5.0, and GPS all in one. With 16MB Flash and 8MB PSRAM, it handles multitasking and data...

The PortaRF is an advanced, open-source hardware platform that merges the powerful HackRF One with the versatile PortaPack H4M into a single, portable device. Covering an extensive frequency range from 1 MHz to 6 GHz , the PortaRF offers standalone software defined radio capabilities...

The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...

The bladeRF 2.0 micro xA9 THERMAL is a next‑generation software defined radio (SDR) covering 47MHz to 6GHz with a 61.44MSPS sampling rate and full 2×2 MIMO . Designed for serious RF developers, researchers, and wireless security professionals, it combines wideband performance, low...

The XB-200 LF/MF/HF/VHF Transverter dramatically expands the frequency coverage of bladeRF 1.0 x40 and x115 SDRs down to 60kHz–300MHz , enabling low-frequency applications like LF/MF/HF amateur radio, VLF research, and shortwave monitoring. This block up/down-converter adds seamless...

The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 115KLE Altera Cyclone IV FPGA , the bladeRF x115 delivers the performance and flexibility needed for custom RF...

The BT‑100 Bias‑Tee Power Amplifier is a wideband TX amplifier designed specifically for the bladeRF 2.0 micro and classic bladeRF xA4/xA5/xA9 SDR platforms. Featuring a Mini‑Circuits PHA‑1H+ MMIC , it delivers clean gain from 50MHz to 6GHz , ideal as an intermediary or final stage in...