Software Defined Radio

The PortaRF is an advanced, open-source hardware platform that merges the powerful HackRF One with the versatile PortaPack H4M into a single, portable device. Covering an extensive frequency range from 1 MHz to 6 GHz , the PortaRF offers standalone software defined radio capabilities...

LILYGO T-SIM7080G-S3 is a compact board made for IoT and low-power mobile data projects. It uses an ESP32-S3 chip and the SIM7080G module, so you get Cat-M and NB-IoT cellular support, WiFi, Bluetooth 5.0, and GPS all in one. With 16MB Flash and 8MB PSRAM, it handles multitasking and data...

The bladeRF x40 is a compact, professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 40KLE Altera Cyclone IV FPGA , the x40 provides an affordable entry into serious SDR work while retaining...

The bladeRF 2.0 micro xA9 THERMAL is a next‑generation software defined radio (SDR) covering 47MHz to 6GHz with a 61.44MSPS sampling rate and full 2×2 MIMO . Designed for serious RF developers, researchers, and wireless security professionals, it combines wideband performance, low...

The XB-200 LF/MF/HF/VHF Transverter dramatically expands the frequency coverage of bladeRF 1.0 x40 and x115 SDRs down to 60kHz–300MHz , enabling low-frequency applications like LF/MF/HF amateur radio, VLF research, and shortwave monitoring. This block up/down-converter adds seamless...

The bladeRF x115 is a professional‑grade USB 3.0 software defined radio (SDR) covering 300MHz to 3.8GHz with full‑duplex 40MSPS 12‑bit quadrature sampling . Built around a 115KLE Altera Cyclone IV FPGA , the bladeRF x115 delivers the performance and flexibility needed for custom RF...

The BT‑100 Bias‑Tee Power Amplifier is a wideband TX amplifier designed specifically for the bladeRF 2.0 micro and classic bladeRF xA4/xA5/xA9 SDR platforms. Featuring a Mini‑Circuits PHA‑1H+ MMIC , it delivers clean gain from 50MHz to 6GHz , ideal as an intermediary or final stage in...

The BT-200 Bias-Tee Low Noise Amplifier is a wideband RX LNA designed specifically for bladeRF SDR platforms, providing a simple way to dramatically lower system noise figure and increase receive sensitivity. Featuring a Mini-Circuits TSS-53LNB+ MMIC , the BT-200 delivers ultra low noise...

The USRP B210 Kintex-7 FPGA Board is an enhanced version of the classic USRP B210 software defined radio, featuring a modern Xilinx Kintex-7 FPGA upgrade over the original Spartan-6. Optimized for Vivado development with USB 3.0 Type-C delivering up to 56MHz real-time bandwidth , this...

The HackRF Pro Development Board is an upgraded software-defined radio transceiver designed for RF testing, signal analysis, prototyping, and SDR development. With wide frequency coverage from 100kHz to 6GHz and an adjustable range up to 7.1GHz, it is suitable for a broad range of receiving and...

The PlutoSky R2 Zynq-7020 AD9363 is an upgraded PlutoSDR-compatible software-defined radio platform designed for RF development, signal analysis, FPGA experimentation, and high-speed data transmission. This version is equipped with the AD9363 RF transceiver and is supplied without a power...

The DSTIKE Deauther32 Watch MINI is a compact wearable Wi-Fi security testing and development device powered by the Espressif ESP32-C5 RISC-V MCU. As the next generation of the DSTIKE Deauther Watch series, it upgrades from older ESP8266-based hardware to a modern dual-band platform with support...

The DSTIKE HackHeld32 II is a compact ESP32-S3 handheld development board designed for Wi-Fi security education, IoT experiments, game development, and creative DIY electronics projects. Featuring a 1.54-inch color TFT display, eight physical buttons, a built-in buzzer, RGB LED, external GPIO...

The DSTIKE Deauther Watch X is a wearable ESP8266-based 2.4GHz Wi-Fi security testing and development device designed for cybersecurity education, authorized wireless research, ESP8266 learning, and portable maker projects. It combines a 1.3-inch OLED display, onboard buttons, buzzer, detachable...

The DSTIKE ESP32-S3 Handheld Game Console is a compact open-source game development board designed for makers, developers, students, and retro gaming enthusiasts. Powered by the ESP32-S3 N16R8 with 16MB flash and 8MB PSRAM, it is ideal for building custom games, learning embedded programming,...

The DSTIKE AI Home Security Sidekick Lite is the ultra-compact USB version of the DSTIKE AI Home Security Sidekick Eve. Designed as a plug-and-play ESP32-S3 network monitoring companion, it brings AI-style desktop interaction, Wi-Fi security awareness, deauth detection, and a 1.3-inch color...

The DSTIKE Deauther Watch Y is a wearable ESP8266-based 2.4GHz Wi-Fi security testing and development device designed for cybersecurity education, authorized wireless research, ESP8266 learning, and portable maker projects. It combines a 1.3-inch OLED display, USB-C connectivity, a 1000mAh...

The DSTIKE Deauther32 MiNi 5G ESP32-C5 is a compact Wi-Fi security testing and development board designed for cybersecurity education, authorized wireless research, IoT prototyping, and ESP32-C5 firmware development. Built around the ESP32-C5 RISC-V SoC, it offers a small form factor, USB Type-C...

The DSTIKE Deauther Watch Z is a portable ESP8266-based 2.4GHz Wi-Fi security testing watch with added BadUSB HID functionality, USB-C connectivity, TF card support, and a built-in 1000mAh battery. It is designed for cybersecurity education, authorized wireless testing, HID security awareness,...

The DSTIKE 10dBi Directional WiFi Antenna is a high-gain antenna designed to focus wireless signal strength in a specific direction. It is ideal for users who need stronger, more stable WiFi coverage toward a targeted area instead of wide all-direction coverage. With 10dBi gain and a...